Amp Wiring Kits Compared: 8-Gauge, 4-Gauge and 1/0-Gauge from Stinger and Kicker
Pick the Stinger SK4281 8-gauge kit for a compact or lower-power amp. For most single amps up to the mid-power range, pick a 4-gauge kit: the Stinger SK4641 or SK4241, or the Kicker 46CK4 with an RCA cable. For big mono amps and multi-amp builds, step up to the Stinger SK4201 1/0-gauge kit. Tony matches the gauge and fuse to your amp before the install.
What a wiring kit does
An amp wiring kit brings power from the battery to the amp, grounds it and protects the run with a fuse. The kits here include power and ground wire, a fuse holder, remote turn-on wire and terminals, and some add speaker wire and an RCA signal cable, per their listings.
Every kit here is on our listings, and the shop installs the kit as part of the amp job in our own bay at 8696 Atlantic Ave in South Gate. For choosing the amp itself, see our car amplifier buying guide.
Side by side
This table is built only from our own product listings. Where a listing does not state a part, the cell says so instead of guessing.
A lower gauge number is a thicker wire: 1/0 is thicker than 4, and 4 is thicker than 8.
Car amp wiring kits compared, from our product listings. "Not in our listing" means our product page does not say that part is included, so ask us before you count on it.
| Kit | Gauge | Fuse | RCA cable | What the listing says it is for |
|---|---|---|---|---|
| Stinger SK4281 | 8 AWG | Inline fuse holder | Not in our listing | Compact and lower-power amps, like a small 4-channel or a mini sub amp |
| Stinger SK4641 | 4 AWG | Inline fuse holder | Not in our listing | Most single amps up to the mid-power range |
| Stinger SK4241 | 4 AWG | Inline fuse holder | Not in our listing | A common choice for a single sub amp or a 4-channel amp |
| Kicker 46CK4 | 4 AWG | Fuse holder | Included | Most single-amp installs in the mid-power range |
| Stinger SK4201 | 1/0 AWG | Fuse holder | Not in our listing | Big mono amps and multi-amp builds |
8-gauge for small amps
The Stinger SK4281 is an 8-gauge kit with power and ground wire, an inline fuse holder, remote wire, speaker wire and terminals. Its listing says 8-gauge is right for compact and lower-power amps, like a small 4-channel or a mini sub amp, and that Tony moves bigger amps to a 4-gauge kit.
4-gauge for most single amps
The Stinger SK4641 and SK4241 are 4-gauge kits with power and ground wire, an inline fuse holder, remote wire, speaker wire and terminals. The Kicker 46CK4 adds an RCA signal cable.
1/0-gauge for big systems
The Stinger SK4201 is a 1/0-gauge kit with heavy power and ground cable, a fuse holder, remote wire and terminals, for big mono amps and multi-amp builds where 4-gauge would run warm, per its listing. Tony decides whether the car also needs a battery or charging upgrade when he quotes the install.
How to get it wired
Text (213) 674-9042 with your year, make and model and the amp you have or want, and Tony will match the kit to it.
Everything is bought and installed or picked up at the shop at 8696 Atlantic Ave in South Gate, and you can ask about our Payment Plan. Stock moves, so call (323) 944-7844 to confirm the kit is on the shelf before you drive over.
In the shop
Gear from this post
Shop by vehicle
Find parts that fit your car
Pick your year, make and model to see the stereos, speakers and boxes that fit it, with prices. Pickup and install in South Gate.
Fastest way to a price
Text us what you drive or what you are building
Car audio: send the year, make, and model, and Tony gets back to you with what fits and a price. DJ gear: tell Joe the room or the party, like "backyard party, 150 people" or "starter DJ setup," and he will put a setup together.
More from the blog
Car Amplifier Buying Guide: Picking the Right Amp for Your Car
The right amp depends on three things: what radio you have, what you want to power, and how much room you can give up. Tell us those and we can usually narrow it to two or three amps in a few minutes. Here is how we walk people through it at the counter.
Read itCar Subwoofer Buying Guide: Sub, Box, Amp and Wiring for Your Ride
The right sub setup depends on three things: how much space you can give up, how hard you want it to hit, and what radio you are keeping. Small space and a factory radio usually means a powered sub. A trunk or truck cab you can give up means a loaded box and a mono amp. Here is how we point people at the counter, with the parts that come along for the ride.
Read it10-Inch Car Subwoofers Compared: JL Audio, Kicker, Alpine and Focal
A 10 fits smaller boxes than a 12. For a first sub on a modest amp, look at the Alpine W10S4, Kicker 50CWCD104 or 52CVR104, or JL Audio 10W0v3 and 10W1v3. For a truck cab or under a seat, pick a shallow 10: the JL Audio 10TW3-D4 and Alpine RS-W10D4 mount 3.25 inches deep, and the Kicker 48CWRT104 and 46L7T104 need 3-7/16 and 3-3/4 inches. For more output, step up to the Kicker 50CVX104 or 44L7S104, the Alpine S2-W10D4 or R2-W10D4, or the JL Audio 10W3v3 and 10W6v3. At the top are the JL Audio 10W7AE, the Alpine HDZ-W10 and the Kicker L7X.
Read itQuestions on Amp Wiring Kits Compared: 8-Gauge, 4-Gauge and 1/0-Gauge from Stinger and Kicker
What gauge amp kit do I need?
Per our listings, 8-gauge suits compact and lower-power amps, 4-gauge suits most single amps up to the mid-power range, and 1/0-gauge is for big mono amps and multi-amp builds. Tony matches the gauge and fuse to your amp.
Which kit includes an RCA cable?
The Kicker 46CK4 lists an RCA cable.
Do I need a battery upgrade?
Sometimes, on big systems. Tony decides whether the car needs a battery or charging upgrade when he quotes the install.
Can you install the kit and the amp?
Yes. The shop installs the wiring kit as part of the amp job in our bay at 8696 Atlantic Ave in South Gate. Call or text first to set up a time.